Sony STR-DH790 Help Manual page 57

DTS:X Dialog Control "DIALOG" (*5)
HDMI settings "<HDMI>"
Control for HDMI "CTRL.HDMI"
Standby Linked to TV "STBY.LINK"
Standby Through "STBY.THRU"
HDMI Audio Out "AUDIO.OUT"
HDMI Sound Field Sync "S.F. SYNC"
HDMI Subwoofer Level "SW LVL"
HDMI Signal Format "SIG. FMT."
For details on the HDMI Signal Format, refer to the Operating Instructions.
BLUETOOTH settings "<BT>"
BLUETOOTH Standby mode "BT STBY" (*6)
BLUETOOTH AAC "BT AAC"
BLUETOOTH Power "BT POWER"
System settings "<SYSTEM>"
Auto standby mode "AUTO.STBY"
Sleep timer "SLEEP"
USB update "UPDATE"
Version display "VER. X.XXX" (*7)
Model name display "STR-DH790"
*1
You can select this setting only when you have performed Auto Calibration and saved the settings.
*2
Some parameters or settings may not be available depending on the speaker pattern setting.
*3 You can only select this parameter if the speaker is set to "SMALL".
*4 You cannot select this setting in the following cases:
[2ch Stereo], [Direct], [Dolby Surround], or [Front Surround] is selected.
[Pure Direct] is set to [On].
Headphones are connected.
*5
You can select this setting only when DTS:X content compatible with the DTS:X Dialog Control function is being played back.
*6
You can only select this parameter when a BLUETOOTH device is paired.
*7 X.XXX represents the version number.
4-731-211-11(1) Copyright 2018 Sony Corporation
57