Sony STR-DH790 Help Manual page 37

Help Guide
MULTI CHANNEL AV RECEIVER
STR-DH790
Setting the crossover frequency of the speakers [Crossover Freq]
After you perform Auto Calibration, a crossover frequency is set for each speaker according to the measured results. If a
speaker is set to [Small] in the [Speaker Setting] menu, you can manually adjust the bass crossover frequency by
performing the following steps.
Select [Speaker Setting] from the home menu.
1
Press , and then press
2
Press / to select the speaker for which you want to adjust the crossover frequency, then press
3
Press / to set the crossover frequency, then press
4
Note
[Crossover Freq] cannot be set when headphones are connected.
According to the Auto Calibration results, no crossover frequency is set for speakers whose size is determined to be [Large].
Additionally, [Crossover Freq] cannot be set by performing the steps above.
The surround back speakers will be set to the same setting as that of the surround speakers.
Hint
You can also set the crossover frequency of speakers from the "<SPKR>" menu on the display panel.
Related Topic
List of settings that can be adjusted using the menu on the display panel
/ repeatedly to select [Crossover Freq].
4-731-211-11(1) Copyright 2018 Sony Corporation
37
.
.