Sony STR-DH790 Help Manual page 3

Operating the receiver menu using the TV remote control (Remote Easy Control function)
About Language Follow function
Using the sleep timer
Switching the brightness of the display panel
Saving power during standby mode
Viewing information on the display panel
Reverting to the factory default settings
Adjusting settings using the menu on the display panel
Operating the receiver with the menu on the display panel
List of settings that can be adjusted using the menu on the display panel
Auto Calibration "<A.CAL>"
Calibrating the phase characteristics of the speakers "A.P.M." (Automatic Phase Matching)
Level settings "<LEVEL>"
Outputting a test tone from each speaker "T. TONE"
Adjusting the output level according to the connected TV "TV.OFFSET" (TV volume offset function)
Speaker settings "<SPKR>"
Setting the height from the floor to the ceiling "CEILING.H."
Selecting the unit of measurement "DIST.UNIT"
Input settings "<INPUT>"
Switching between digital and analog audio "IN MODE"
Changing the name for each input "NAME IN"
Using other audio input jacks "A. ASSIGN"
Audio settings "<AUDIO>"
Synchronizing audio with video output "A/V SYNC"
Selecting the language of digital broadcasts "DUAL"
Compressing the dynamic range "D. RANGE"
Switching the mode of the DTS decoder "NEURAL-X"
Using the DTS:X Dialog Control function "DIALOG"
HDMI settings "<HDMI>"
Controlling HDMI devices "CTRL.HDMI"
3