Aquathin Platinum-90 Getting Started page 46

C2. Anatomy of John Guest Speedfit ® Fitting
Tubing End-stop
Internal O-Ring
Remove the red Lock-Clip
46 © 2007-2016 Aquathin Corporation. All rights reserved.
Collet
1)Insert tubing into fitting,
2)Past the Internal O-Ring,
3)Until it bottoms out
against the tubing end-stop
Pull on tubing to ensure a
secure connection, then
slide red Lock Clip be-
tween collet and fitting.
Push Collet up against body of the
fitting, which will release the internal
teeth.
While compressing Collet,
pull out the tubing.