Table of Contents
Advertisement
13. Prepare Storage Tank
Remove the plug
on top of the
storage
tank,
revealing an inlet.
Wrap Teflon pipe
tape
on
the
threads
of
the
storage tank inlet;
then place three
(3)
drops
of
regular household
chlorine
bleach
into the opening.
Figure 12. Storage tank preparation
Attach the tank
ball valve as shown in the
prevent chlorine from escaping.
Close the tank ball valve by turning the blue handle
perpendicular to the valve body; then screw the valve
onto the storage tank until firm. DO NOT OVER-
TIGHTEN. Determine the position for the storage tank
beneath the sink. If space is at a premium, it is OK to lay
the tank on its side. A stand is included.
14.
Connect
Main
Assembly to Storage
Tank
With the tank in position,
measure and cut a length of
tubing to connect the inlet
of
the
main
assembly
indicated by "TO TANK"
and the "T" connector on
the tank ball valve.
figure
13.)
17
© 2007-2016 Aquathin Corporation. All rights reserved.
figure
above. Close valve to
Figure 13. Main assembly
to storage tank (color of
(See
tubing is for illustrative
purposes)
Advertisement
Table of Contents
