Table of Contents
Advertisement
Operating the appliance
Locking ring
Turn the TurboTool over and slide
off the locking ring.
Removing blockages from the Turbobrush
Switch the vacuum cleaner off
and disconnect the power plug
from the electrical outlet.
Lay the Turbobrush on a flat
surface and turn over to expose
the brushbar. Using a pair of
scissors, cut through any threads
or hairs caught around the
brushes and brushbar.
Taking care of your machine
Detach lower housing and
remove blockage.
Tabs
To re-assemble the TurboTool,
ensure that the tabs are engaged
and pivot the lower housing
closed. Slip the locking ring over
the neck of the TurboTool and into
the groove to finish.
Advertisement
Table of Contents
