Page 1
LOW VOLTAGE SUBMERSIBLE WATER PUMP & DC POWER SUPPLY INSTRUCTION MANUAL MODEL 02EV300 - EV1910LV-DC 02EV325 - EV2910LV-DC VERSION www.pondmax.com.au 02EV350 - EV3910LV-DC FEB 2022 02EV375 - EV4910LV-DC PMAX EVOII 1910_2910_3910_4910 DC Pump Instructions.indd 1 PMAX EVOII 1910_2910_3910_4910 DC Pump Instructions.indd 1...
WELCOME TO THE WORLD OF PONDMAX™. YOU MADE THE RIGHT CHOICE INVESTING IN THIS QUALITY PRODUCT. THANK YOU AND ENJOY. BEFORE USING THIS PRODUCT, PLEASE READ THESE INSTRUCTIONS OF USE CAREFULLY AND MAKE YOURSELF FULLY FAMILIAR WITH THE UNIT. PLEASE KEEP THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE.
WATER PUMPS DESIGN HIGHLIGHTS The PondMAX EvoII Submersible Pumps have been manufactured with advanced technology to provide you with the best quality pumps for your pond or water feature. Visit our website to view our range of pond filtration, outdoor/ underwater lighting, water treatments and general accessories.
Ensure the connectors are correct to ensure power alignment. • All PondMAX Submersible pumps are cooled by water flowing through the inside of the motor body. If the pump flow becomes restricted it will overheat and could cause permanent damage.
For various suggestions of the correct model and fountain type selection see the specification table on page (page 2). For the purpose of these guidelines, a PondMAX #30 Jet kit has been selected. The installation principle will be similar for the other types.
WATERFEATURE PLUMBING GUIDE If used to supply water to a waterfeature, cascade, waterfall, ect; where a pipe is needed to be used, use the hosetails supplied in the package. • For best results, use the bigger tubing size • Then select the Hosetail. Locate the second O’ring recommended in the table previously.
SUBMERSIBLE WATER PUMPS Turn the filter case in the direction as indicated by the arrow, then lift it off. Unclip the snap-fit catch under the base plate, and drawn out in the direction of the arrow. Take off the base plate. To maintain the impellor of the pump, turn the Impellor Cover in an anti-clockwise direction as indicated by the arrow, to the stop position.
IMPORTANT These accessories and attachments are recommended for use with your PondMAX product specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use the accessory or attachment for its stated purpose.
SUBMERSIBLE WATER PUMPS SPARE PARTS PART DESCRIPTION EV1910-DC EV2910-DC EV3910-DC EV4910-DC 12EV002 Sponge Filter cage. Internal Sponge Pre-filter Insert Flow Adjuster Knob - [EV1900 - EV4900] Front filter Screen - With hole for flow adjuster - [EV1900 - EV4900] Blanking Cap for Hole in Front Filter Shown Screen (optional) 1"...
TROUBLESHOOTING Problem Reason Solution Check that the plug is connected and No Power power point turned on. Sponges and filter media blocked with Clean the sponges and filters. sludge. WATER PUMP Impellor is blocked with sludge or lime Clean the Impellor as per the instructions. NOT WORKING scale build up.
Aquatec. • For any warranty to be valid, an original proof of purchase must be provided. Please consult your retailer for quality original PondMAX replacement parts. Visit www.aquatecequipment.com for your nearest stockists. E.&O.E. F O R G A R D E N S T H A T G O T H E E X T R A YA R D PMAX EVOII 1910_2910_3910_4910 DC Pump Instructions.indd 11...
Page 12
HOTLINE 1300 AQUATEC www.pondmax.com.au PMAX EVOII 1910_2910_3910_4910 DC Pump Instructions.indd 12 PMAX EVOII 1910_2910_3910_4910 DC Pump Instructions.indd 12 27/4/2022 9:46 am 27/4/2022 9:46 am...
Need help?
Do you have a question about the EV1910LV-DC and is the answer not in the manual?
Questions and answers