Subscribe to Our Youtube Channel
Related Manuals for PondMAX EV11200
Summary of Contents for PondMAX EV11200
- Page 1 SUBMERSIBLE WATER PUMP INSTRUCTION MANUAL MODEL HOTLINE 1300 AQUATEC 02EV200 - EV7200 02EV225 - EV9200 VERSION 02EV250 - EV11200 JUNE 2016 02EV275 - EV13600 PMAX EVOII 7200_9200_11200_13600 Pump Instructions.indd 1 7/11/17 7:53 am...
-
Page 2: Technical Specifications
WELCOME TO THE WORLD OF PONDMAX™. YOU MADE THE RIGHT CHOICE INVESTING IN THIS QUALITY PRODUCT. THANK YOU AND ENJOY. BEFORE USING THIS PRODUCT, PLEASE READ THESE INSTRUCTIONS OF USE CAREFULLY AND MAKE YOURSELF FULLY FAMILIAR WITH THE UNIT. PLEASE KEEP THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE. -
Page 3: Design Highlights
WATER PUMPS DESIGN HIGHLIGHTS The PondMAX EvoII Submersible Pumps have been manufactured with advanced technology to provide you with the best quality pumps for your pond or water feature. Visit our website to view our range of pond filtration, outdoor/ underwater lighting, water treatments and general accessories. -
Page 4: Important Safeguards
• All PondMAX Submersible pumps are cooled by water flowing through the inside of the motor body. If the pump flow becomes restricted it will overheat and could cause permanent damage. -
Page 5: Installation
SUBMERSIBLE WATER PUMPS INSTALLATION For your convenience, a filter-less cage has been used on this model. It has a flat section on the front nose. This is to facilitate a vertical mount is necessary. • A basic plastic fountain kit is not recommended for •... -
Page 6: Cleaning Instructions
CLEANING INSTRUCTIONS Begin by ensuring that the mains power supply is disconnected before attempting any maintenance or adjustment of the unit or the water body. Remove the unit from the water. If your unit is connected to a sponge filter, the filters and sponges will clog up over time. -
Page 7: Important Notes
SUBMERSIBLE WATER PUMPS IMPORTANT NOTES • On some models re-insert the internal sponge back into the filter cage and reattach to the pump. On other models re-attach the front filter screen. • It is important to ensure that this is carried out regularly as the cooling path inside the motor will •... -
Page 8: Exploded View
IMPORTANT These accessories and attachments are recommended for use with your PondMAX product specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use the accessory or attachment for its stated purpose. - Page 9 Complete Kit For EV7200-EV9200 9, 13, 14, 15, - O'rings, Inlet & Outlet, Threaded 13EV037 16, 18 Bushes and Uni-directional Balljoint. Complete Kit For EV11200-EV13600 9, 13, 14, 15, - O'rings, Inlet & Outlet, Threaded 13EV038 16, 18 Bushes and Uni-directional Balljoint.
-
Page 10: Troubleshooting
TROUBLESHOOTING Problem Reason Solution Check that the plug is connected and No Power power point turned on. Sponges and filter media blocked with Clean the sponges and filters. sludge. WATER PUMP Impellor is blocked with sludge or lime Clean the Impellor as per the instructions. NOT WORKING scale build up. -
Page 11: Extended Warranty
Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. Please consult your retailer for quality original PondMAX replacement parts. Visit www.aquatecequipment.com for your nearest stockists. E.&O.E. - Page 12 HOTLINE 1300 AQUATEC PMAX EVOII 7200_9200_11200_13600 Pump Instructions.indd 12 7/11/17 7:53 am...
Need help?
Do you have a question about the EV11200 and is the answer not in the manual?
Questions and answers