Transport; Checking The Delivery; Installation; Installation Instructions - Schmalz RECB Assembly Instructions Manual

5 Transport
CAUTION
Risk of crushing due to improper securing of the load
4 Properly secure the product during transport.
4 Wear protective shoes and gloves.
6 Checking the Delivery
The scope of delivery can be found in the order confirmation. The weights and dimensions are listed in the delivery
notes.
1. Compare the entire delivery with the supplied delivery notes to make sure nothing is missing.
2. Damage caused by defective packaging or occurring in transit must be reported immediately to the carrier
and J. Schmalz GmbH.
7 Installation
7.1 Installation Instructions
CAUTION
Improper installation or maintenance
Personal injury or damage to property
4 Prior to installation and before maintenance work, the vacuum generator must be disconnected
from the power supply and secured against unauthorized restart!
For safe installation, the following instructions must be observed:
Use only the connectors, mounting holes and attachment materials that have been provided.
Firmly connect and secure pneumatic and electrical line connections to the vacuum generator.
7.2 Installing the RECB
WARNING
Falling objects due to improper mounting
Serious injury!
4 Using a torque wrench, tighten the screws of the flange connection on the bottom side of the
housing as well as the set screws for the flange connection on the top side of the housing to the
specified tightening torques.
4 Wear protective work shoes.
CAUTION
Potential contact with sharp-edged components during connection work
Hand injuries!
4 Wear suitable work gloves.
The RECB must not be exposed to strong vibrations.
Always apply a low-strength threadlocker to the fastening screws (e.g. Loctite 221) after opening and
closing the housing.
EN-US · 30.30.01.02586 · 02 · 09/22 9 / 20