Removing & Installing Body Components; Battery - Honda CBR500R 2016 Operation Manual

Removing & Installing Body Components

Battery

❙
Removal
Make sure the ignition switch is off.
1. Remove the front seat.
2. Unhook the rubber strap from rear side.
3. Disconnect the negative
the battery.
4. Disconnect the positive
the battery.
5. Remove the battery taking care not to
drop the terminal nuts.
❙
Installation
Install the parts in the reverse order of
removal. Always connect the positive
terminal first. Make sure that bolts and nuts
are tight.
P. 61
2
terminal from
-
terminal from
+
+
Make sure the clock is set to the proper time
after the battery is reconnected.
For proper handling of the battery, see
"Maintenance Fundamentals."
"Battery Goes Dead."
Rubber
Positive terminal
strap
P. 25
2
P. 48
2
P. 101
2
Negative
terminal
Battery
59