Advertisement
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -4. Front base, Base (rear side)
DISASSEMBLING
(1) Front base section can be disassembled as shown in Fig. 12.
1. Remove Knob 44 as shown below.
9
Front base
(2) Base (rear side) can be disassembled as shown in Fig. 13.
1. Unscrew four 4x18 Tapping screws. So. Base (rear side) can be separated from Main frame complete.
Base
Turn counter
12
clockwise for
3
unscrewing.
6
Knob 44
4x18 Tapping screw
Fig. 12
2. Front base can be separated
from Main frame complete.
Knob 44
Flat washer 10
Compression
spring 18
Rubber packing
Front base
Fig. 13
2. Remove entirely Foot and Torsion spring 7.
4x18
Tapping screw
3. Remove Scale label from
Knob 44, because the numbers
on Scale label deviates from the
actual planing depth, in case of
disassembling of Front base
and Base (rear side).
Scale label
4. From Front base, remove
Compression spring 18
and Rubber packing.
Foot
P 8 / 11
Torsion spring 7
Advertisement
