Makita Maktec MT362 Technical Information

Makita Maktec MT362 Technical Information

Router 12mm (1/2")

Advertisement

T
ECHNICAL INFORMATION
Model No.
Description
C
ONCEPT AND MAIN APPLICATIONS
Model MT362 has been developed as the cosmetic change model of
maktec router MT360.
Its main features are:
• Industrial performance and durability at less expense
• Ergonomically contoured knob style handles with rubberized soft grip
S
pecification
Voltage (V)
Current (A)
110
120
220
230
240
No load speed: min.
¹= rpm.
ˉ
Collet capacity*
Plunge capacity: mm (")
Switch type
Protection from electric shock
Power supply cord: m (ft)
Weight according to
EPTA-Procedure 01/2003: kg (lbs)
* Collet capacity may vary by country.
S
tandard equipment
Wrench 8 - 24 ................................................. 1
Collet sleeve 6mm or 1/4" .............................. 1
Collet sleeve 8mm or 3/8" .............................. 1
Templet guide 16 ............................................ 1
Guide holder assembly ................................... 1
Straight guide ................................................. 1
Trimmer guide assembly ................................ 1
Dust cover ..................................................... 1 (only for the specifications with knob 50)
Straight bit 12E or 12 ..................................... 1
Dust nozzle ..................................................... 1 (for European countries only)
Note: The standard equipment for the tool shown above may vary by country.
O
ptional accessories
Dust nozzle
MT362
Router 12mm (1/2")
Cycle (Hz)
15
50-60
15
50-60
7.9
50-60
7.6
50-60
7.2
50-60
12mm (15/32") or 1/2" (12.7mm)
0 - 60 (0 - 2-3/8)
Double insulation
Continuous Rating (W)
Input
1,650
-
1,650
1,650
1,650
22,000
Toggle
2.0 (6.6)
5.5 (12.2)
PRODUCT
P 1/ 9
L
H
Dimensions: mm (")
Length (L)
284(11-1/8)
Width (W)
148 (5-7/8)
Height (H)
300 (11-3/4)
Max. Output (W)
Output
1,000
2,200
1,000
2,200
1,000
2,200
1,000
2,200
1,000
2,200
W

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Maktec MT362 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Makita Maktec MT362

  • Page 1 ECHNICAL INFORMATION PRODUCT P 1/ 9 Model No. MT362 Description Router 12mm (1/2") ONCEPT AND MAIN APPLICATIONS Model MT362 has been developed as the cosmetic change model of maktec router MT360. Its main features are: • Industrial performance and durability at less expense •...
  • Page 2: Necessary Repairing Tools

    P 2/ 9 epair CAUTION: Repair the machine in accordance with “Instruction manual” or “Safety instructions”. [1] NECESSARY REPAIRING TOOLS Code No. Description Use for 1R269 Bearing extractor removing Ball bearing 629ZZ 1R233 Round bar for arbor 4-100 removing Cap 11 [2] LUBRICATION Apply lubricating oil VG100 to the following portions designated with the black triangle to protect parts and product from unusual abrasion.
  • Page 3 P 3/ 9 epair [3] DISASSEMBLY/ASSEMBLY [3] -1. Armature (cont.) DISASSEMBLING (2) Disassemble Armature from Motor section. (Fig. 3) Fig. 3 1. Remove Brush holder caps 2. Separate Motor bracket by unscrewing 3. Remove Collet nut and and Carbon brushes. four M5x45 Pan head screws.
  • Page 4 P 4/ 9 epair [3] DISASSEMBLY/ASSEMBLY [3] -1. Armature (cont.) ASSEMBLING (1) Assemble Armature by reversing the disassembly procedure. (Refer to Fig. 3) (2) Assemble Motor housing to Base. (Refer to Fig. 2) Note: Make sure that Lock pin is already mounted to Motor bracket. (Refer to the right drawn in Fig. 2) (3) Assemble M10 Nylon nut and Knob 50.
  • Page 5 P 5/ 9 epair [3] DISASSEMBLY/ASSEMBLY [3] -2. Ball Bearing 6004ZZ DISASSEMBLING (1) Separate Motor bracket from Motor housing. And Disassemble Armature from Motor bracket. (Refer to Fig. 3) Ball bearing 6004DDW remains in Motor bracket in this step. (2) Disassemble Ball bearing 6004DDW as drawn in Fig. 5. Fig.
  • Page 6: Lock Lever

    P 6/ 9 epair [3] DISASSEMBLY/ASSEMBLY [3] -4. Lock Lever ASSEMBLING (1) Assemble Base to the machine. (Refer to the right drawing in Fig. 2) (2) Assemble Lock lever to Motor bracket as drawn in Fig. 7. Fig. 7 1. Insert Lock pin deeply into the hole for Lock lever of Motor bracket. Then, tighten M8x16 Set bolt turning it counterclockwise until it stops.
  • Page 7 P 7/ 9 epair [3] DISASSEMBLY/ASSEMBLY [3] -5. Stopper on Base complete DISASSEMBLING Disassemble Stopper as drawn in Fig. 8. Fig. 8 1. M6 (-) Flat head screw can be removed by turning it clockwise. 2. Remove Stopper from Base. And remove Compression spring 12.
  • Page 8: Circuit Diagram

    P 8/ 9 ircuit diagram Fig. D-1 Color index of Lead wire’s sheath Brown Black Blue White Power supply cord White lead wire is used for some countries instead of blue. Line filter Line filter is not used for some countries. Black lead wire is used for some countries Field...
  • Page 9 P 9/ 9 iring diagram Fig. D-3 Wiring of Field lead wires on Motor housing (under Top cover) Fix Field lead wires (white, black) with Lead wire holders so that they can not get loose in Motor housing. Lead wire holder Fig.

Table of Contents