Steps For Setting Up Your Charger - RCA digital Xsound BR250 VHF Instruction Manual

Steps for setting up your charger:

1. Plug the adapter's AC connector into the
AC outlet socket.
2. Plug the adapter's DC connector into the
DC socket on the back of the charger.
3. Place the radio with the battery attached,
or the battery alone, in the charger.
BR250 TM Professional Two-Way Radio Instruction Manual
Copyright © 2015 RCA Communications Systems
4. Make sure the battery contact is touching
the charging terminals. The charging
process begins when the red LED light
illuminates.
5. The green LED light will illuminate
approximately one hour later, indicating
the battery is fully charged.
13