Rca Rdr2000 Tm Series Overview (Continued); Preparing Radio For Initial Use; Setting Up The Charger - RCA RDR2500UX Instruction Manual

Prodigi TM RDR2000 Series Professional Digital Two-Way Radio Instruction Manual
RCA RDR2000 Series Overview
TM
Antenna
1
Top Button*
2
Channel Knob
3
LED Indicator
4
On/Off/Volume Knob
5
Speaker
6
Microphone
7
Display (RDR2550 / RDR2600)
8
Limited Keypad (RDR2550)
9
Full Keypad (RDR2600)
10
Side Button 1*
11
Push-to-Talk (PTT) Button
12
Side Button 2*
13
Side Button 3*
14
Accessories Connector
15
Screw-On Belt Clip
16
Battery
17
Battery Charging Contact Points
18
(continued)
*
These buttons are programmable
by your RCA Communications
Systems Dealer only upon request
at the time of purchase.
Copyright © 2016 RCA Communications Systems
Preparing Your Radio for Initial Use
Setting Up Your Charger
1. Plug the adapter's AC connector into the
AC outlet socket. (see image A)
2. Plug the adapter's DC connector into the
DC socket on the back of the charger. (see
image B)
3. Place the radio with the battery attached,
or the battery alone, in the charger. (see
image C)
4. Make sure the battery contact is touching
the charging terminals. The charging
process begins when the red LED light
illuminates.
5. The green LED light will illuminate
approximately two hours later, indicating
the battery is fully charged.
Image A
9
Image B