Tennant V-BP-6 Operator And Parts Manual page 10

EN English
5. Replace exhaust filter every six months.
6. Inspect vacuum hose for clogged debris.
7. Keep machine and accessories clean and in good
working condition.
8. Inspect power cord for damage after each use.
Replace power cord immediately if damaged.
9. After each use, neatly coil power cord.
STORING MACHINE
Carefully coil power cord and store machine in a cool
dry area. Do not expose to rain, store indoors.
TROUBLE SHOOTING
Problem Cause
Thermal protec-
Machine will
tor tripped
not operate
Faulty cord
Faulty on/off
switch
Faulty motor
Poor vacuum Full vacuum bag
suction
Vacuum hose or
pickup tool clog
Damaged vacu-
um hose
Clogged filters
10
Solution
Remove obstruc-
tion, allow motor
to cool and reset
button
Replace cord
Contact Service
Contact Service
Replace bag
Remove clog
Replace vacuum
hose
Replace filters
MACHINE SPECIFICATIONS
MODEL V- BP- 6
Width x Height x Depth 9.5in x 21in x 7in
/ 24cm x 53cm x
18cm
Width x Height x Depth 11in x 25in x
w/ Harness 10in / 28cm x
63.5cm x 25cm
Weight 13 lb / 5.9 kg
Bag Capacity 6 qt / 5.7 l
Voltage / Frequency 120 AC / 60 Hz
Vacuum Motor Rating 1200W / 10A
HEPA Filtration 99.97% @0.3
micron
Air Flow 111 cfm /
3.1 m
Water Lift 119 in /
3023 mm
Power Cord Length 50 ft / 15 m
Sound Pressure 67 dBA
Level L
pA
Protection Grade IP20
Tennant V- BP- 6, V- BP- 10 (01- 2015)
V- BP- 10
9.5in x 25in x 7in
/ 24cm x 63.5cm
x 18cm
11in x 27in x
10in / 28cm x
68.5cm x 25cm
13.5 lb / 6.1 kg
10 qt / 9.5 l
120 AC / 60 Hz
1200W / 10A
99.97% @0.3
micron
111 cfm /
3 3
/min 3.1 m /min
119 in /
3023 mm
50 ft / 15 m
67 dBA
IP20