Tennant V-BP-6 Operator And Parts Manual page 7

POWER CORD
1. Before operating machine, make sure the
extension cord is looped through the cord restraint
clip located on backrest as shown.
WARNING: Always use cord restraint clip to
prevent risk of an electrical hazard.
2. Inspect power cord for damage before each use.
Replace cord immediately if damaged.
3. Only connect power cord into a grounded 3 hole
electrical outlet. No adapter should be used with
the machine. Do not remove, bend or modify
ground pin. Do not use additional extension cords.
Grounded
3 Hole Outlet
Grounding Pin
4. Hang the power cord on the cord hook when not
operating machine.
Tennant V- BP- 6, V- BP- 10 (01- 2015)
ACCESSORY TOOLS
Each machine comes equipped with a variety of
accessory tools to meet your cleaning needs.
To Attach Accessory Tools:
1. For floor cleaning, attach wand to vacuum hose
and attach desired floor tool. If equipped, turn
collar on wand to lock tool in place.
2. For wands equipped with the telescopic feature,
push the release button to extend the length of the
wand.
3. For off- floor cleaning, attach the desired accessory
tool directly to vacuum hose.
English EN
7