Table of Contents
Advertisement
17. AUX
External peripheral devices, such as game consoles, camcorders, navigation units, phones, etc. can be connected
to the AUX connector on the back of this unit using the AV media cables.
Switching to AUX IN
Touch the [AUX] button on Main Menu to select the mode. If the external device connected to the AUX input has
an audio signal, the unit will broadcast audio of the external device. Press Menu button on
Operational Panel to return to the Main Menu.
You cannot directly control external devices connected to AUX input.
18. CAMERA INPUT OPERATIONS
Switching to Camera mode
Touch [Camera] button on Main Menu.
The LCD will display the external camera video. The screen will display "No Video Signal" message, if a valid
camera is not connect to this head unit.
Press MENU button on Operational Panel to return to the Main Menu.
Setting Camera audio
Select "ON" button in the Camera Audio setting of the General setting.
The audio from camera will heard when back gear is on. The volume control is available but not indicated on the
screen due to the safety.
Select "MUTE" button, then mute the audio of the current mode when back gear is on.
Select "Off" button, then play the audio of the current mode when back gear is on.
Note:
If the reverse cable is connected correctly to the car, the unit goes to camera mode automatically when the car is in
reverses.
As an additional safety feature, the audio from camera with built-in microphones can be heard through
the NX706AU.
NX706AU
41
Advertisement
Table of Contents
