Siemens CM656GB 6B Series User Manual And Installation Instructions page 17

Hide thumbs Also See for CM656GB 6B Series:
Table of Contents

Advertisement

¡ To prevent condensation, when the microwave out-
put is 600 watts (max), the appliance automatically
switches on a heating element. The cooking com-
partment and the accessories become hot. The
cooking result is not affected by this.
You can switch off this drying function in the basic
settings.
→ "Basic settings", Page 22
WARNING ‒ Risk of burns!
At the highest settings in microwave only mode, the
drying function will automatically switch on an addi-
tional heating element to heat the cooking compart-
ment.
Never touch the inside surfaces of the cooking com-
partment or the heating elements while they are hot.
Keep children at a safe distance.
Press
⁠ .
1.
Select the "Microwave" in the operating modes
2.
menu.
Use the rotary selector to set the microwave output
3.
setting.
Press the cooking time.
4.
Use the rotary selector to set the cooking time.
5.
Press
to start the operation.
6.
a The microwave starts and the cooking time counts
down.
a Once the cooking time has elapsed, an audible sig-
nal sounds. The time shown in the display is zero.
Once the cooking time has elapsed:
7.
Press
to silence the audible signal manu-
ally.
If necessary, set the microwave output setting
and cooking time again.
When the food is ready, press
appliance off.
If you have switched off the drying function for the
8.
microwave in the basic settings, dry the cooking
compartment.
→ "Drying", Page 26
Note: If you open the appliance door during operation,
the operation stops. When you close the appliance
door, you must press
changed the basic setting, make sure that the mi-
crowave does not resume operation without food in-
side.
→ "Basic settings", Page 22
Changing the microwave output setting
If you change the microwave output setting, the cook-
ing time is reset.
Press
to pause operation.
1.
Press the microwave output setting.
2.
Use the rotary selector to set the microwave output
3.
setting.
Press
to resume operation.
4.
Changing the cooking time
After the microwave starts operating, you can change
the cooking time directly.
Use the rotary selector to change the cooking time.
a The change is applied immediately.
to switch the
to continue. If you have
11.3 Microwave combination
To reduce the cooking time, you can use certain types
of heating in combination with microwave mode.
The possible microwave output settings are:
¡ 90 watts
¡ 180 watts
¡ 360 watts
The possible types of heating are:
¡ 4D hot air
¡ Top/bottom heating
¡ Circulated air grilling 
¡ Grill, large area
¡ Grill, small area
Setting the microwave combination
Note:
Note the correct way to operate the microwave:
¡ → "Safety", Page 2
¡ → "Preventing material damage", Page 6
¡
¡ → "Cookware and accessories with microwave",
Page 16
Press
⁠ .
1.
Select "Microwave combination" in the operating
2.
modes menu.
a "Type of heating", "Temperature", "Microwave output
setting" and "Cooking time" recommendations are
displayed.
Press the required function.
3.
Set the desired value with the rotary selector.
4.
Press
to start the operation.
5.
a The appliance starts to heat and the time starts to
count down.
a Once the cooking time has elapsed, an audible sig-
nal sounds. A notification appears in the status bar.
Once the cooking time has elapsed:
6.
Press
to silence the audible signal manu-
ally.
If necessary, set another combination.
When the food is ready, press
appliance off.
Changing the temperature
Once the MicroCombi operation has started, you can
change the temperature directly.
Press the temperature.
1.
2.
Use the rotary selector to change the temperature.
a The change is applied immediately.
Changing the cooking time
Once the MicroCombi operation has started, you can
change the cooking time at any time.
Press "Cooking time".
1.
Use the rotary selector to change the cooking time.
2.
a The change is applied immediately.
Changing the microwave output setting
Once the MicroCombi operation has started, you can
change the microwave output setting directly.
Press the microwave output setting.
1.
Use the rotary selector to adjust the microwave out-
2.
put setting.
a The change is applied immediately.
Microwave en
to switch the
17

Advertisement

Table of Contents
loading

Table of Contents