4.3.10.3
n
40
Displaying water heater specifications
Note
This category is solely intended for the installation engineer and/or service and
maintenance engineer.
The corrected data is shown in the table of general and electrical data (see section 12.1).
Call up the menu to display the water heater specifications as follows:
1.
[
]: SETTINGS.
Confirm with [ENTER].
2.
Scroll with [ ] to SPECIFICATIONS.
Confirm with [ENTER].
The display shows the sub-menu for displaying water heater specifications.
3.
Scroll with [ ] to the section to be displayed, for example REGULATION INTERVAL.
The corresponding display appears
User part