Lochinvar EcoCharger ECH 32-220 G CE Installation, Commissioning, User & Maintenance Instructions page 37

n
0311723_ECH_32-129_III_ENEN_V2.6, 2022-10-17
Setting the switch-on time
3.
Use [ ] and [ ] to set the day. In the example this is SU.
Confirm with [ENTER].
The cursor moves to the hour digits, which will blink.
4.
Use [ ] and [ ] to set the switch-on hour to the desired value. In the example, this
is 08.
Confirm with [ENTER].
The cursor moves to the minute digits, which will blink.
Note
Because the switch-off time can never be earlier than the switch-on time, the switch-off
time setting is automatically adjusted with the switch-on time.
5.
Use [ ] and [ ] to set the minutes. In the example, this is 15. Confirm with
[ENTER].
The cursor moves to the hour digits of the switch-off period.
Setting the switch-off time
6.
Use [ ] and [ ] to set the hours. In the example, this is 012.
Confirm with [ENTER].
The cursor moves to the minute digits, which will blink.
7.
Use [ ] and [ ] to set the minutes.In the example, this is 45.
Confirm with [ENTER].
The cursor moves to the water temperature. See the figure
Setting the water temperature
8.
Use [ ] and [ ] to set the water temperature. In the example this is 75°C.
Confirm with [ENTER].
The cursor moves to PUMP ON
37