Table of Contents
Advertisement
PROBLEM
No Steam.
Water drips from the
Pressing Plate.
The Pressing Handle
will not move into the
Automatic Maximum
pressure position.
CAUSE
Water Level is too low.
Controls have not been
properly set.
Steam Button has been
pressed too long.
Item on the Ironing
Board is too thick to
use this pressure.
16
SOLUTION
Fill the water tank.
If suitable for the fabric,
make a selection to a
higher temperature.
Wait for the Steam
Ready Light to come on.
If not use spray misting
bottle as directed.
,
Don t press the Steam
Button more than 5
seconds continuously.
Use lighter pressure on
thicker items.
Use added steam for
wrinkles.
Advertisement
Table of Contents
