Table of Contents
Advertisement
STEP 8 - CLEANING (As needed)
a. Cleaning the Pressing Plate:
Place the Pressing Cushion in the center of the Ironing Board. Place a clean
towel over the Pressing Cushion and the Ironing Board. Set the Steam
Control and Temperature Control to their maximum setting. When the Ready
Light comes on, gently lower the Pressing Plate onto the Pressing Cushion.
With water in the reservoir tank, press the Steam Burst Control 6 to 7 times.
Be careful to avoid touching the hot metal surfaces or leaving your hand in
the bursts of steam.
b. Once the Pressing Plate has cooled down you can clean the surface with a
damp cloth. DO NOT use any abrasives on the Pressing Plate. This Pressing
Plate has a non-stick coating that will assist in cleaning.
C. The Ironing Board Cover is removable for normal washing. You can rinse
the Ironing Board Cover with mild detergent and warm water.
10
Advertisement
Table of Contents
