Table of Contents
Advertisement
TROUBLE SHOOTING
Below is a chart detailing the most common problems, their causes and
solutions. Before shipping any appliance to a service center please check to
make sure that the solution is not listed here:
PROBLEM
Steam Press cannot
be opened using
Pressing Handle.
Steam Press becomes
warm but Does not
remove wrinkles.
Press Does not get
warm.
CAUSE
Locking Knob is in
Locked position.
Temperature Setting
is not high enough for
the fabric attempted.
Temperature has not
been selected.
Press is not plugged
into an outlet.
Automatic Shut-Off
has engaged.
The Pressing Plate has
been raised for more
\than 15 minutes
without use.
15
SOLUTION
Turn the Locking
Knob to the unlocked
position.
Gradually increase the
temperature until
obtaining the desired
results.
Make a proper
selection.
Plug the appliance in.
Press the [ POWER ]
button again.
Advertisement
Table of Contents
