Table of Contents
Advertisement
Caution
Expanded ISO speeds (H) are not available in HDR shooting.
The flash will not fire during HDR shooting.
RAW image quality cannot be set.
AEB is not available.
In HDR shooting, three images are captured with settings such as shutter speed
automatically adjusted. For this reason, even in <Tv> or <M> mode, the shutter
speed and ISO speed will change, relative to your specified speed.
To prevent camera shake, the camera may set a high ISO speed.
When shooting HDR images with [Auto Image Align] set to [Enable], AF point
display information (
) and Dust Delete Data (
) will not be appended to the
image.
If you perform handheld HDR shooting with [Auto Image Align] set to [Enable],
image periphery will be slightly trimmed and resolution will be slightly lowered.
Also, if the images cannot be aligned properly due to camera shake, etc., auto
image alignment may not take effect. Note that when shooting with excessively
bright (or dark) exposure settings, auto image alignment may not work properly.
If you perform handheld HDR shooting with [Auto Image Align] set to [Disable],
the three images may not be properly aligned and the HDR effect may be reduced.
Using a tripod is recommended.
Auto image alignment may not function properly with repetitive patterns (lattice,
stripes, etc.) or flat, single-tone images.
Subjects such as the sky or white walls may not be rendered with smooth gradation
and may have noise or irregular exposure or colors.
HDR shooting under fluorescent or LED lighting may cause issues such as
irregular exposure or colors in HDR images, due to the flickering light source.
Effects of flickering may be reduced by setting [Anti-flicker shoot.] to [Enable].
With HDR shooting, the images will be merged, then saved to the card, so it may
take some time. [BUSY] appears on the screen as images are processed, and
shooting is not possible until processing is finished.
206
Advertisement
Table of Contents
