Table of Contents
Advertisement
3.
Focus on the subject.
4.
Check the display and shoot.
Caution
If the lowest aperture value blinks, it indicates underexposure.
Turn the <
blinking or set a higher ISO speed.
If the highest aperture value blinks, it indicates overexposure.
Turn the <
blinking, or set a lower ISO speed.
Note
Shutter speed display
For example, "0"5" indicates 0.5 sec. and "15"", 15 sec.
Press the shutter button halfway.
The aperture value is set automatically.
As long as the aperture value is not blinking, the standard exposure will
be obtained.
> dial to set a slower shutter speed until the aperture value stops
> dial to set a faster shutter speed until the aperture value stops
136
Advertisement
Table of Contents
