Optical Output Of Audio Received With Hd Programs - Vizio VX32L HDTV10A User Manual

2.7 Connecting an external Receiver/Amp
1. Turn off the power to the LCD HDTV and
Receiver/Amp.
2. Using an audio cable (white and red
connectors), connect the cable to the audio
input connectors on the Receiver/Amp and
connect the other end to the ANALOG OUT
(white area) audio connectors at the rear of
the LCD HDTV.
3. Turn on the power to the LCD HDTV and
Receiver/Amp.
4. Then press the MENU button on the remote
control to open the On-Screen Display (OSD) menu.
5. Press the
6. Press the
7. Press the
now be routed through your Receiver/Amp system.
Note:
a) Refer to your Receiver/Amp user manual to select the corresponding audio input.
b) The audio output is not amplified and cannot be connected directly to external speakers.

Optical Output of Audio received with HD Programs

If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical DIGITAL
AUDIO OUT (gray area) at the rear of the Plasma HDTV. This is active when receiving digital audio with
the programs from the DTV/TV CABLE/ANTENNA input.
Version 9/19/2007
on the remote control to select the Audio menu.
on the remote control to select SPEAKERS.
on the remote control to select OFF so that the sound from the LCD HDTV will
www.VIZIO.com
VIZIO VX32L HDTV10A User Manual
23