Connecting An External Receiver/Amp; Optical Output Of Audio Received With Hd Programs - Vizio LCD VW46L User Manual

2.7 Connecting an external Receiver/Amp

1. Turn off the power to the LCD HDTV and Receiver/Amp.
2. Using an audio cable (white and red connectors), connect the cable to the audio input
connectors on the Receiver/Amp and connect the other end to the ANALOG OUT (white
area) audio connectors at the rear of
the LCD HDTV.
3. Turn on the power to the LCD HDTV
and Receiver/Amp.
4. Then press the MENU button on the
remote control to open the On-Screen
Display (OSD) menu.
5. Press the
select the Audio menu.
6. Press the
select SPEAKERS.
7. Press then
select OFF so that the sound from the
LCD HDTV will now be routed through your Receiver/Amp system.
Press the LAST key once to return to the previous screen or repeatedly to return to your program if task
has been completed.
Note:
a) Refer to your Receiver/Amp user manual to select the corresponding audio input.
b) The audio output is not amplified and cannot be connected directly to external speakers.
2.7.1 Optical
Programs
If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical DIGITAL
AUDIO OUT (white area) at the rear of the LCD HDTV. This is active when receiving audio with the
program being viewed no matter what input is being used.
Version 10/20/2008
on the remote control to
on the remote control to
on the remote control to
Output of
www.VIZIO.com
®
VIZIO VW46L FHDTV20A User Manual
Audio received
24
with HD