Connecting An External Receiver/Amp; Optical Output Of Audio Received With Hd Programs - Vizio VXW20L User Manual

2.7 Connecting an external Receiver/Amp

2.7.1 Optical
Programs
If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical AUDIO
OUT (white area) at the rear of the VXW20L HDTV10A. This is active no matter which input (AV,
Component, etc) is being used.
1. Turn off the power to the LCD HDTV and Receiver/Amp.
2. Using an SPDIF cable, connect the cable to the audio input connector
on the Receiver/Amp and connect the other end to the OPTICAL OUT
(white area) audio connectors at the rear of the LCD HDTV.
3. Turn on the power to the LCD HDTV
and Receiver/Amp.
4. Then press the MENU button on the
remote control to open the On-
Screen Display (OSD) menu.
5. Press the
select the Audio Adjust menu.
6. Press the
to select SPEAKERS.
7. Press the
select OFF so that the sound from
the LCD HDTV will now be routed
through your Receiver/Amp system.
Press the LAST key once to return to the previous screen or repeatedly to return to your program if task
has been completed.
Note:
a) Refer to your Receiver/Amp user manual to select the corresponding audio input.
b) The audio output is not amplified and cannot be connected directly to external speakers.
Version 1/3/2008
Output of
on the remote control to
on the remote control
on the remote control to
www.VIZIO.com
VIZIO VXW20L HDTV10A User Manual
Audio received
24
with HD