Crompton SL1-01 Instructions

Crompton Instruments DL3N1 Installation requirement guide for Integra DL1-01, TL1-01 and INT-1221 products
2. Referring to Category 1 or Category 2 diagram blocks, select the figure that matches your installion requirement.
3. Select figure letter (A,B,C OR D), use Tables 1,2 or 3 and install CT and meter with required CABLE TYPE and programme SETTING in meter
CATEGORY 1
FIGURE A
LINE SIDE - P1
LOAD SIDE - P2
ALL TRANSFORMERS FROM SAME DIRECTION/CATEGORY
TABLE 1 OUTLINES SET UP AND CABLE REQUIREMENTS FOR
INSTALLATIONS FROM CATEGORY 1 ONLY
EXAMPLE
YOUR INSTALLATION ARE AS PER FIGURE A AND/OR FIGURE B ONLY
TABLE 1 DL1-01 AND TL1-01 METERS
CT FIGURE # CT FRAME SIZE
CATEGORY 1 ALL
TRANSFORMERS FROM DIFFERENT/MIXED DIRECTIONS/CATEGORIES
EXAMPLE. INSTALLATION HAS A CT FROM FIGURE "A" AND A CT FROM FIGURE "C"
EXAMPLE. INSTALLATION HAS A CT FROM FIGURE "B" AND A CT FROM FIGURE "D"
CT FIGURE # CT FRAME SIZE
CATEGORY 1 ALL
For more information
TM
Call 1300 36 26 26 | sales@colterlec.com.au | www.colterlec.com.au
SL1-01 AND DL1-01 AND TL1-01 MULTI FUNCTION METERS
Instruction.
P1
1. Install DL3N1 CT with always facing
Current Transformer Orientation Chart
FIGURE B
L L
O I
A N
D E
S S
I I
D D
E E
- -
P P
2 1
CABLE TYPE SETTING OR
WHITE TOP

TABLE 3 OUTLINES SET UP AND CABLE REQUIREMENTS FOR

TABLE 3 DL1-01 AND TL1-01 METER
CABLE TYPE SETTING AND
GREEN BOT
Line side
of System.
CATEGORY 2
FIGURE C
LOAD SIDE - P2
LINE SIDE - P1
TABLE 2 OUTLINES SET UP AND CABLE REQUIREMENTS FOR INSTALLATIONS
FROM CATEGORY 2 ONLY
EXAMPLE
YOUR INSTALLATION ARE AS PER FIGURE C AND/OR FIGURE D ONLY
TABLE 2
CT FIGURE # CT FRAME SIZE
CATEGORY 2 ALL
AND CT FRAME SIZE
CATEGORY 2 ALL
Crompton DL3N1 install guide rev15.xlsx
FIGURE D
L L
I O
N A
E D
S S
I I
D D
E E
- -
P P
1 2
DL1-01 AND TL1-01 METERS
CABLE TYPE SETTING
WHITE BOT
CABLE TYPE SETTING
WHITE BOT