Optional Wi-Fi Setup (50Hz Models Only) - Jacuzzi J-435 Owner's Manual

J-445/J-435 Export
D. Programming the ProClarity Depth Filter Timer
A programmable filter timer can be set to remind
you when to replace the ProClarity Depth Filter.
Tap
ProClarity Depth 50
Programming Menu.
1. From the "Water Care" Menu you can to set
the "ProClarity Depth" timer, Figure 12.7f.
2. Tap or
increments. The range is from OFF to 90 days.
Note: It is not recommended that this feature be turned OFF. In order to
continually maintain clean and working filters, it should be program as
instructed.
3. Tap to confirm and save your changes.
4. Tap to return to the "Water Care" Menu. Tap again to return to the
Settings Menu.
5. When the timer expires, a message will appear on the control panel
display, page 65. Follow the previous instructions to reset the
timer. The filter must be replaced. Refer to Section 13.1, page 49,
for filter location. If you tap "snooze" the message will clear but the
error icon
days.
12.8

Optional Wi-Fi Setup (50Hz models only)

From the Settings Menu, tap
Orange. Tap
and 12.8b. Make sure you have downloaded the Wi-Fi App for this setup.
SETTINGS
Figure 12.8a
1. You need to follow the instructions from the App in order to connect
the Wi-Fi.
2. While the system attempts to connect you will see the, "Spa Wi-Fi
Setup in-progress," Figure 12.8b. When the connection is done the
display will read, "Spa Wi-Fi Setup Successfully Connected".
44
(Figure 12.7b) to enter the
to change the days in 10-day
will display and the reminder screen will reappear in 10
or
to enter the programming options, Figures 12.8a
Wi-Fi
Water Care
Wi-Fi
Lock
to highlight the "Wi-Fi" Menu tab in
Wi-Fi Connect
Spa Wi-Fi Setup
In-progress
Figure 12.8b
ProClarity Depth
40 days left
add
50
days
Figure 12.7f
Reset?