Inter-m PC-9335AD Operating Manual page 8

STEREO DOUBLE CASSETTE DECK
4. OPEN BUTTON
Depress this button to open the corresponding cassette door.
5. NORMAL/HIGH DUBBING SPEED SELECTOR
Select dubbing speed and initiate dubbing by depressing the corresponding button. The selected dubbing
speed will be indicated in the display screen.
6. LEVEL METER
Displays the input signal level when recording, or the output signal level of a tape during playback.
7. DISPLAY LAMP
Display status of operation.
8. COUNTER RESET
Depress this button to reset tape counter to zero.
9. TAPE COUNTER
This numeric display shows the current position of the tape relative to the position of the tape when the
counter was reset to zero (000).
10. MODE SELECTOR
This selector switch permits the selection of the desired mode of operation.
Single Side only Play Mode – Operation automatically stops at the end of one side of the cassette that
is playing.
Auto-Reverse Mode – Operation automatically stops at the end of both sides of the cassette that is
playing.
Continuous Play Mode – Operation automatically repeats Auto-Reverse mode of the cassette until
stopped manually.
11. REC BUTTON (●)
Depress this button to prepare to record. The deck will remain in record-pause mode until the play button is
selected to begin the recording or the stop button is depressed to cancel the recording. The record indicator in
the display screen will indicate the record button has been depressed. Both tape direction indicators will flash
in the display screen while in the record-pause mode.
12. PAUSE BUTTON (
Depressing the Pause button during playback or recording will temporarily stop the cassette tape. Both tape
direction indicators for the corresponding deck will flash in the display screen while in the pause mode.
6
PC-9335AD
II )