Dubbing; Recording - Inter-m PC-9335AD Operating Manual

STEREO DOUBLE CASSETTE DECK
Dubbing (copying tapes)
1. Set Play Mode Selector to desired position.
2. Switch the AC mains power on.
3. Insert the cassette to be copied into Deck A.
4. Insert the cassette onto which you wish to dub (record) into Deck B.
5. Press the Dubbing button that corresponds with the desired dubbing speed.
6. Press Stop button to end dubbing.
NOTE: If monitoring of dubbing is desired, tapes should be dubbed at normal speed. Normal speed dubbing
will also result in improved quality of dubbed tapes.

Recording

1. Set Play Mode Selector to desired position.
2. Switch the AC mains power on.
3. Depress the OPEN button to open the Deck B cassette door.
4. Load a blank cassette into Deck B with the side to be recorded facing outward.
5. Close cassette door.
6. Position the MODE selector to record on one side or both sides of the cassette, as desired.
7. Press REC Button.
8. Adjust RECORD LEVEL until -11dB mark illuminates (flashes) intermittently.
9. Position the MODE selector to record on one side or both sides of the cassette, as desired.
10. Press PLAY button to begin recording.
11. Press STOP button to end recording.
11
PC-9335AD