Oven Light - Cafe CES700M2NS5 Owner's Manual

Oven Light

SHOCK OR BURN HAZARD: Before replacing oven light bulb, disconnect the electrical power to the
WARNING
range at the main fuse or circuit breaker panel. Failure to do so may result in electric shock or burn.
BURN HAZARD: The glass cover and bulb should be removed when cool. Touching hot glass with
CAUTION
bare hands or a damp cloth can cause burns.
Oven Light Replacement (on some models)
To remove:
of the glass cover clear the grooves of the socket. Wearing
latex gloves may offer a better grip.
2. Using gloves or a dry cloth, remove the bulb by pulling it
straight out.
To replace:
watts. Replace the bulb with the same type of bulb that was
removed. Be sure the replacement bulb is rated 120 volts or
130 volts (NOT 12 volts).
2. Using gloves or a dry cloth, remove the bulb from its
packaging. Do not touch the bulb with bare fingers. Oil from
skin will damage the bulb and shorten its life.
3. Push the bulb straight into the receptacle all the way.
4. Place the tabs of the glass cover into the grooves of the
For improved lighting inside the oven, clean the glass cover
frequently using a wet cloth. This should be done when the
oven is completely cool.
5. Reconnect electrical power to the oven.
Oven Light Replacement (on some models)
To remove:
of the glass cover clear the grooves of the socket. Wearing
latex gloves may offer a better grip.
2. Remove the bulb by turning it counter-clockwise.
To replace:
1. Replace bulb with a new 40-watt appliance bulb. Insert the
bulb and turn it clockwise until it is tight.
2. Place the tabs of the glass cover into the grooves of the
For improved lighting inside the oven, clean the glass cover
frequently using a wet cloth. This should be done when the
oven is completely cool.
3. Reconnect electrical power to the oven.
49-2000386 Rev. 1
Receptacle
G9 Bulb
Glass cover
(on some models)
Receptacle
Socket
Tab
Use gloves
or cloth
25