NEC MultiSync M Series Installation Manual page 3

5. Insert the Option Board into the monitor and affix it in place with the removed screws used for slot cover (Figure 2).
(Recommended fasten force: 50~80 N•cm).



OOTE: Unless your monitor is purchased as part of a special bundle package, no Option Boards will be in the box or installed
in the monitor. These are optional accessories available for separate purchase. Please contact your supplier for a list of
Option Boards available for your monitor.

M ake sure the board is inserted into the slot in the correct orientation.

D o not apply excessive force to manipulate the Option Board before attaching it with screws.

WA
I
NE:

Ensure the Option Board is securely fastened using the original screws to prevent the OPTION from falling out
the product. A falling Option Board may expose you to danger.
Raspberry Pi Compute Module
MultiSync is a trademark or registered trademark of NEC Display Solutions, Ltd. in Japan and other countries.
Intel and the Intel logo are trademarks of Intel Corporation or its subsidiaries.
All other brands and product names are trademarks or registered trademarks of their respective owners.
Intel SDM-S
®
For installation videos, please visit our website.
Raspberry Pi Compute Module
Figure 2
Intel Smart Display Module Large
®
English−2
Intel SDM-L
®
Rev. 2