Advertisement
Installing an Option Board
You can install Option Boards that are compatible with Intel
Display Module Large (Intel
1. Turn off the main power switch.
2. If signal cables or the power cord is connected to the monitor, please disconnect them.
3. Place the monitor face down on a flat even surface that is larger than the monitor screen. Use a sturdy table that can easily
support the weight of the monitor.
OOTE:
To avoid scratching the LCD panel, always place a soft cloth, such as a blanket that is larger than the monitor's
screen area, on the table before laying the monitor face down. Make sure there is nothing on the table that can
damage the monitor.
4. Intel® SDM-S:
Remove SLOT COVER a .
Raspberry Pi Compute Module:
Remove SLOT COVER b .
Intel
SDM-L:
®
Remove SLOT COVER a and b (Figure 1).
Slide the CENTER RAIL to the right and remove it. Reverse the process to reattach it (Figure 1-1).
SDM-L) specifications.
®
SLOT COVER
Figure 1
Smart Display Module Small (Intel
®
SLOT COVER
SLOT COVER
English−1
SDM-S) and Intel
Smart
®
®
CENTER RAIL
Figure 1-1
Advertisement
