Table of Contents
Advertisement
Control function operation
will not start. Also, the starter motor could
be damaged.
[ECJ01041]
1 Start switch
The engine will not start when the clip is re-
moved from the engine shut-off switch.
EJU31212
Throttle lever
The throttle lever increases the engine speed
when the lever is squeezed.
1 Throttle lever
The throttle lever returns automatically to its
fully closed (idle) position when released.
EJU35933
Steering system
By turning the handlebars in the direction you
wish to travel, the angle of the jet thrust noz-
23
zle is changed, and the direction of the water-
craft is changed accordingly.
1
Since the strength of the jet thrust determines
the speed and degree of a turn, throttle must
always be applied when attempting a turn,
except at trolling speed.
The angle of the jet thrust nozzle can be ad-
justed to suit operator preference. (See page
61 for information on adjusting the jet thrust
nozzle angle.)
EJU31273
Steering pole
The steering pole can be moved up or down
to change the height of the handlebars.
1 Handlebar
2 Jet thrust nozzle
Advertisement
Table of Contents
