Advertisement
.
22
Fan2RatateError
working. Check and replace fan 2
23
Fan3RatateError
working. Check and replace fan 3.
24
Fan4RatateError––
working. Check and replace fan 4.
25
Fan5RatateError––
working. Check and replace fan 5.
26
Fan6RatateError
working. Check and replace fan 6.
27
Fan7RatateError
projector working. Check and replace fan 7.
28
Fan8RatateError
projector working. Check and replace fan 8.
Lamp ignited fail 3 times when system power on.
40
LampInitFail–
Check and replace ballast and power board.
a). To check the ballast control cable between Ballast and
Micro controller BD.
b). To check the Lamp
c). To check the power cable of Ballast
–
41
LampLitFail
and replace lamp.
a). To check the Lamp
b). To check the fans
42
Ballast1UartError
and replace ballast and power board.
a). To check the ballast control cable between Ballast and
Micro controller BD.
b). To check the ballast
50
InterLockOpen
a). To check the Lamp door.
b). To check the cable between Interlock BD and Micro
Controller BD.
51
AirFilterError
–
DDP3021 communication fail when system power
60
DMDInitFail
on. Check and replace DMD chip, DMD board, W2 board,
Ballast, and Power board
––
Fan2 locked, Fan2 get error during projector
––
Fan3 locked, Fan3 get error during projector
Fan4 locked, Fan4 get error during projector
Fan5 locked, Fan5 get error during projector
––
Fan6 locked, Fan6 get error during projector
–––
Fan7 locked, Fan7 get error during
–––
Fan8 locked, Fan8 get error during
Lamp shut down while system is working. Check
–
Ballast UART communication fail. Check
–
Lamp door was opened. Check the lamp door
–
Check and replace air filter.
Advertisement
