Table of Contents
Advertisement
About the PC display
When the unit is connected to a PC, it is recognised as an external drive.
≥ Removable disk (Example:
We recommend using VideoCam Suite 3.5
to copy or write back motion picture data.
Using Windows Explorer or other
programmes on the PC to copy, move or
rename files and folders recorded with
this unit will result in them being unusable
with VideoCam Suite 3.5.
It is impossible to write data to the built-in
memory or HDD on this unit from a PC.
Example folder structure of an SD card:
CAM_SD
DCIM
100CDPFQ
101CDPFS
MISC
SD_VIDEO
MGR_INFO
PRG001
SDR-T76
/
SDR-H101
Example folder structure of built-in
memory or HDD:
CAM_MEM/CAM_HDD*
DCIM
100CDPFQ
101CDPFS
MISC
SD_VIDEO
MGR_INFO
PRG001
) is displayed in [Computer].
SDR-T76
* [CAM_MEM] is displayed
SDR-H101
* [CAM_HDD] is displayed.
The following data will be recorded.
1 Up to 999 still pictures in JPEG
format (S1000001.JPG etc.)
2 JPEG format still pictures created
from the motion picture
3 The DPOF setting files
4 SD-Video standard control data
5 SD-Video standard video data
(maximum of 99 files)
∫ Copying your still pictures to
your PC
Card reader function (mass storage)
Still pictures recorded with this unit can be
copied to the PC with Explorer or other
programmes.
1
Double click the folder that contains
the still pictures. ([DCIM] #
[100CDPFQ] etc.)
2
Drag and drop the still pictures onto
the destination folder (on the PC's
HDD).
≥ Do not delete the SD card's folders. Doing
so may make the SD card unusable in this
unit.
≥ When data not supported by this unit has
been recorded on a PC, it will not be
recognised by this unit.
≥ Always use this unit to format SD cards.
95
VQT3J03
Advertisement
Table of Contents
