Before Switching On - ECG ERS 21780 NWA+ Instruction Manual

Levelling the door
• Before levelling the position, make sure that the refrigerator is disconnected from the supply network.
Read and follow the safety instructions to prevent any accidents.
GB
1. French key size 10
2. Fixed axis
3. Adjustable leg
• The door is too low: open the door, use the French key to loosen the securing nut then turn the adjustment
nut anti-clockwise (1) until the door is lifted to the correct height. Then tighten the securing nut in an anti-
clockwise direction.
• The door is too high: open the door, use the French key to loosen the securing nut then turn the
adjustment nut clockwise (2) until the door is lowered to the correct height. Then tighten the securing nut
in an anti-clockwise direction.

Before switching on

• Leave the product to rest for at least ½ hour from the time it was transported to your home.
• You may detect a slight odour when you fi rst switch it on. This odour will disappear once
the appliance starts to cool.
• After fi rst switching on, leave the refrigerator active for 2-3 hours before placing food inside
(in the case of hot weather in the summer then leave for 4 hours).
52
1
The door is
not level
2
3
4
4. Securing nut
5. Adjusting nut
5
1