Accessories - Husqvarna 592 XP Operator's Manual

Equivalent vibration levels, a
2
Front handle, m/s
2
Rear handle, m/s
Saw chain/guide bar
Type of drive sprocket/number of
teeth
Saw chain speed at 133% of max.
engine power speed, m/s.
Recommended cutting equipment
Chainsaw models Husqvarna 585, 592 XP, 592 XPG
have been evaluated for safety according to EN ISO
11681-1:2011 (Machinery for forestry - Portable
chainsaw safety requirements and testing) and fulfill the
safety requirements when equipped with the below listed
guide bar and saw chain combinations.
Guide bar
Length, in/cm Pitch, in
18/46 3/8
20/50
24/61
28/71
30/76
32/81
36/91
The usable cutting length is usually 1 in less than the
nominal guide bar length.
Filing equipment and filing angles
Using Husqvarna file gauge will give you the correct
filing angles. We recommend you to always use a
4
Equivalent vibration level, according to ISO 22867, is calculated as the time-weighted energy total for vibration
levels under various working conditions. Reported data for equivalent vibration level has a typical statistical
dispersion (standard deviation) of 1 m/s
36
Husqvarna 585
4
hveq
6.6
5.3
Rim/7
30.6

Accessories

Gauge, in/mm
0.058/1.5
2
.
Husqvarna 592 XP
6.6
5.3
Rim/7
30.6
Kickback and guide bar nose radius
For sprocket nose bars the nose radius is defined by the
number of teeth (for example 10T). For solid guide bars
the nose radius is defined by the size of the nose radius.
For a given guide bar length, you may use a guide bar
with smaller nose radius than listed.
Saw chain
Max. nose radius Type
34 mm Husqvarna C85
11T
Husqvarna file gauge to restore the sharpness of the
saw chain. The part numbers are given in the table
below.
If you are not sure of how to identify what saw chain you
have on your chainsaw, please visit
www.husqvarna.com for more information.
Husqvarna 592 XPG
6.6
5.3
Rim/7
30.6
Length, drive
links (no.)
68
72
84
92
102
105
115
1471 - 001 - 18.02.2021