Ross Mira+ Installation And Cabling Manual

Ports and Connectors
USB 3.1
LTC AES In/Out
DVCPRO-HD
9-16 & 1-8 DisplayPort
In
(8-Channel)
RS-422
10 Gigabit
Serial
Ethernet
Mira Control TC
USB 3.1
Surface In
LTC AES In/Out
AVC-Intra
9-16 & 1-8 DisplayPort
In
(12-Channel)
RS-422
10 Gigabit
Serial
Ethernet
Mira Control TC
USB 3.1
Surface In
Notes:
• Only the Reference BNC (Ref In) on the left (Ch A-D) card is operational
when more than one card is installed.
• The AES Digital Audio I/O ports require the TASCAM AES DIGITAL DB25
Breakout Cable option (not supplied with system).
• The number of SDI inputs and outputs depends on the model of
server you have.
• If you are recording from, or playing into, an external device you must
have all devices connected to the same reference signal to ensure
proper audio/video synchronization.
• A breakout cable connects to the Serial port and provides 8 RJ45 serial
connectors.
• Both RS-422 serial and ethernet control are supported for remote
control.
• The TC In (LINE IN) audio port is used for TC Chase.
© 2021 Ross Video Limited. Ross®, Tria, Mira, Mira Express, Tria Express, Tria News, and any related marks are trademarks or registered trademarks of Ross Video Limited. All other trademarks are the property of their respective companies. PATENTS ISSUED and PENDING. All
rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, mechanical, photocopying, recording or otherwise, without the prior written permission of Ross Video. While every precaution has been
taken in the preparation of this document, Ross Video assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein.
Caution:
Before you set up and operate your server, see the
"Important Safety Instructions" in your User manual.
Power, Video, Audio and Control Cabling
Note:
The number of Video I/O cards in your server depends on the
Power
options installed. Every video channel features an SDI input and SDI output;
and every channel can be used as a recorder or player.
Note: An octal breakout cable is supplied with the server and provides 8
RJ45 male connectors for serial control over the first 8 channel transports.
RJ45 to D9 adapters are also provided.
Mini Analog Audio
Out
LTC In
SDI
Out
SDI
In
Ref Quad Viewer
In Out
Mini Analog Audio
Out
RS-422
Serial
SDI
Out
SDI
In
Ref Quad Viewer
Note:
It is recommended that you
In Out
the AC Power Adapter to the device before
Mains
connecting to Mains Power.
Power
Specifications
SDI Video Formats
525i (480i) 59.94Hz
625i (576i) 50Hz
720p 50/59.94Hz
1080i 50/59.94Hz
1080p 23.98/24Hz
1080p 50/59.94Hz
UHDTV1 50/59.94Hz
Note:
Some video formats require specific hardware to be installed in your server.
Installation and Cabling
AES Audio In/Out
TASCAM / AES-59
(Tracks 9-16)(Tracks 1-8)
Computer Monitor
PC Mouse
(1920×1080)
Mira Control
& Keyboard
Surface
Timecode IN
(line in port)
Ethernet
always connect
AVC-Intra DVCPro-HD
Default Passwords
No Yes Windows Abekas
No Yes Administrator multiflex
Yes Yes
Input Voltages
Yes Yes
100 to 240V~
No No
3 to 1.5A
Yes No
60 to 50Hz
Yes No
Operating Environment
Temperature: 20 - 35°C (68 - 95°F)
Humidity: 20 - 80%
AVC-Intra (12-Channel)
Audio
Monitoring
(Ch A-D)
Channel A
SDI Out
Channel A
SDI In to
Record
Quad Out
(Ch E-H)
Reference
DVCPRO-HD (8-Channel)
Audio
Monitoring
(Ch A-D)
Channel A
SDI Out
Channel A
SDI In to
Record
Quad Out
Ch A-D
Reference
Video/Audio Input Specifications
Video Inputs, HD-SDI SMPTE 292M 10-bit at 1.5Gb/s Video Outputs, HD-SDI
Video Inputs, SD-SDI SMPTE 259M 10-bit at 270Mb/s Video Outputs, SD-SDI
Embedded Audio, HD-SDI 8 Tracks, 48kHz at 24-bit Embedded Audio, HD-SDI
Embedded Audio, SD-SDI 4 Tracks, 48kHz at 20-bit Embedded Audio, SD-SDI
AES Discrete Audio 8 or 16 Tracks AES Audio
AES59-2012/TASCAM Digital
Reference Input Tri-Level HD or Composite Analog Analog Audio Monitoring
SD; Terminating
Port Pinouts
IN 2 IN 4 OUT 2 OUT 4
Cold Cold Cold Cold
Gnd Hot Gnd Hot Gnd Hot Gnd Hot
Gnd Hot Gnd Hot Gnd Hot Gnd Hot
Cold Cold Cold Cold
IN 1 IN 3 OUT 1 OUT 3
AES Port
RS422
(RJ45/DB9)
Pin Signal
1 Gnd
2 Tx-
3 Rx+
4 Rx Gnd
5 n/c
6 Tx Gnd
7 Tx+
8 Rx-
9 n/c
Video/Audio Output Specifications
SMPTE 292M 10-bit at 1.5Gb/s
SMPTE 259M 10-bit at 270Mb/s
8 Tracks, 48kHz at 24-bit
4 Tracks, 48kHz at 20-bit
8 or 16 Tracks
AES59-2012/TASCAM Digital
3.5mm headphone connector,
unbalanced, line-level at -10dBv, 2
Tracks (1 stereo pair), user
selectable to monitor any out
4605DR-201-03