Table of Contents
Advertisement
2.INTENDED USE
The Panther is designed to perform ultrasonic non-destructive inspections of industrial and commercial
materials.
Do not use the Panther for any purpose other than its intended use.
Panther can manage all the conventional, phased array modes and Total Focusing Method (TFM).
3.CONNECTIONS
FRONT PANEL CONNECTORS
4 conventional probe
Lemo connectors
IPEX Probe Connector
* Optional
Connect the Panther to the external DC power supply that is connected to an appropriate AC
To turn ON the Panther, switch the ON-OFF button. The internal fans will turn on.
To turn OFF the Panther, switch the ON-OFF button. The internal fans will turn off.
This document is the exclusive property of Eddyfi Technologies. It must not be disclosed, used or reproduced in whole or in part without the written permission of Eddyfi Technologies.
Getting Started guide – PANTHER & Acquire software – Rev A-02
No air intake
Ventilation
3 axis Encoder Molex connector
power source.
REAR PANEL CONNECTORS
Multi-unit communication
USB3.0 ultrafast
data transfer
Ultra-Fast
Ethernet*
On-Off switch
and power
supply
connector
4/28
Advertisement
Table of Contents
