Advertisement
5
USER MANUAL (MK-F13）
9.When the machine is to be emptied allow it to cool. Empty the machine into
buckets where it stands rather than carrying it to the drain. Do not move the
machine with hot or boiling water in it.
Set UP
AC POWER:
The machine has a fixed voltage power supply and can work with an input
voltage of either 120VAC,60Hz or 230VAC,50Hz,depending on the specific
model
To determine the product's power requirements(circuit breaker,power
outlet,and wiring),use the current value listed on the label affixed to the
product's back panel,or refer to the product's specifications chart. The
listed current rating indicates the product's average current draw under
normal conditions.
Always connect the product to a protected circuit(circuit breaker or fuse).
Make sure the product has an appropriate electrical ground to avoid the risk
of electrocution or fire.
Never connect the product to a rheostat(variable resistor) or dimmer
circuit,even if the rheostat or dimmer channel serves only as a 0 to 100%
switch.
ABOUT DRY ICE and CO2
Dry ice is a solid form of carbon dioxide. The term"dry ice"is used because of
its ability to sublimate –the process of transforming from a solid directly to a
gas without any liquid formation. Dry ice reaches a temperature of -189.5°F
(-87.5 ℃
) .When immersed in hot or boiling water,dry ice sublimates and
agitates the water. The releases cold CO2 gas causes the water vapor to
form water droplets in the air. This expansion of gas and moisture pushes
its way out of the machine. Because the CO2 is cold and heavy, the moisture
sinks to the
Advertisement
