Advertisement
3
USER MANUAL (MK-F13）
-During warm up and operation, water will be scolding not.
-Do not place your hand into the water
-Do not remove basket when the unit is plugged in or when heaters are hot.
Warning:
-Always make sure that the voltage of the outlet to which you are connecting
the product is within the range stated on the decal or rear panel of the product
-The product is for indoor use only (IP20) to prevent risk of fire or shock, do
not expose the product to rain or moisture
-Always install the product in a location adequate ventilation, at least 20 in
(50cm) from adjacent surface
-Be sure that no ventilation slots on the product's housing are blocked
-Never connect the product to a dimmer
-Never Carry the product from the cord or any moving part
-The maximum ambient temperature(Ta) is 104°F(40 ℃ ). Do not operate the
product at higher temperatures
-In the event of a serious operating problem, stop using the
product immediately
-Never try to repair the product. Repairs become wet during operation.
Make sure not to use near smooth floors as they may become slippery
-Water temperature should be about 175°F(79 ℃ ) for optimal operation
-Keep this User Manual for future consultation.If you sell the product to
another user, be sure that they also receive this document.
How to work with it :
1.Place the machine on a firm level surface where it will be used. Take off the
lid and fill with water (hot or cold) with about 10liters, the water line subject to
Advertisement
