Download Print this page

Advertisement

Quick Links

PRODUCT: FOG MACHINE
MODEL: MK-F13
USER
MANUAL
VERSION 2.0

Advertisement

loading

Summary of Contents for ONE MK-F13

  • Page 1 PRODUCT: FOG MACHINE MODEL: MK-F13 USER MANUAL VERSION 2.0...
  • Page 2: Product Parameters

    USER MANUAL (MK-F13) Product parameters Product Name 3500W Dry Ice Fog Machine Voltage AC110V/220V,60HZ/50HZ Power 220V 3500w(110V 2000w) Control Manual Consumable Solid Dry Ice Water Consumption 8~10L (up to waterline) Heat-up-time 15min Maximum Output 5~6Min Coverage Area 50~100m² 14.5KG Product Size...
  • Page 3: Safety Notes

    AMAZING BOOSTER FOR STAGE Safety Notes: please read the following Safety Notes carefully before working with the product.The notes include important safety information about installation,usage and maintenance *Always connect the product to a grounder circuit to avoid the risk of electrocution *Always disconnect the products from the power source before cleaning *Make sure the power cord is not crimped or damaged...
  • Page 4 USER MANUAL (MK-F13) -During warm up and operation, water will be scolding not. -Do not place your hand into the water -Do not remove basket when the unit is plugged in or when heaters are hot. Warning: -Always make sure that the voltage of the outlet to which you are connecting...
  • Page 5 AMAZING BOOSTER FOR STAGE the steel plate’s scale mark of the inner side machine until the red light comes on, which means the machine is heating up. 2.Plug the cord into a grounded 22-amp receptacle. A ground fault interrupted receptacle would be preferred. The heater draws 11 amps at 220Volts. 3.While the machine is heating up, the heating time of single electrical heated tube 3000W is 15 minutes.
  • Page 6 USER MANUAL (MK-F13) 9.When the machine is to be emptied allow it to cool. Empty the machine into buckets where it stands rather than carrying it to the drain. Do not move the machine with hot or boiling water in it.
  • Page 7: Dry Ice Warnings

    AMAZING BOOSTER FOR STAGE floor.The droplets in the air create the fog effect. Dry ICE Warnings: *Do Not cover or plug the output nozzle during operation. Compressing the dry ice will cause a chemical reaction that may lead to an explosion *Do Not handle dry ice with bare hands.