Table of Contents
Advertisement
9. The HyperTerminal window appears.
10. From the MachXO2-4000HC Control Evaluation Board, press the reset push-button with reference designator
S1. The Control SoC demo main menu appears.
Setting Up Linux Minicom
Minicom is a terminal program found with most Linux distributions. It can be used to communicate with the
MachXO2-4000HC Control Evaluation Board.
To setup Minicom:
1. Check active serial ports:
#dmesg | grep tty
Note the tty label assigned to the USB port
2. From a command prompt, start Minicom:
#minicom –s
The configuration menu appears.
3. Highlight Serial port setup and press Enter. Serial port settings appear.
4. Press A (Serial Device). Specify the active serial device noted in Step 1 and press Enter.
5. Press E (Bps/Par/Bits). Specify 115200, None, 8 and press Enter.
6. Press F (Hardware Flow Control). Specify None and press Enter.
7. Press Esc. The configuration menu appears.
8. Select Save setup as dfl. Minicom saves the port setup as the new default.
9. Select Exit. The Minicom interface appears.
10. From the evaluation board, press the S1 push-button (GSR).The Control SoC demo main menu appears.
Ordering Information
Description
MachXO2-4000HC Control Development Kit
MachXO2-4000HC Control Development Kit
Ordering Part Number
LCMXO2-4000HC-C-EVN
9
User Guide
China RoHS Environment-Friendly
Use Period (EFUP)
Advertisement
Table of Contents
