Advertisement
Installing the CE Decals
Note:
Thoroughly clean the area where you are
going to apply the decal and let it dry before placing
the decal.
For the 687 Aerator:
1.
Place the 93-6696 decals on the left and right lift
arms as shown in
1. 93-6696 decal location
2.
Place the 138–9470 decal on the main tube as
shown in
Figure
1. 138–9470 decal location
Note:
Decal 95-3357 is not used on 687 aerators.
Figure
6.
Figure 6
7.
Figure 7
For the 686 Aerator:
1.
Place the 93-6696 decal on the left and right
sides of the lift arms, directly below where the
cylinder attaches as shown in
1. 93-6696 decal location
2.
Place decal 95-3357 on the hand pump and the
cylinder as shown in
g224309
1. 95-3357 decal location
g415479
4
Figure
8.
Figure 8
Figure
9.
Figure 9
g224360
g224361
Advertisement
