Related Manuals for FastTt Universal Mounting System
Summary of Contents for FastTt Universal Mounting System
- Page 1 [Designed for Speed] Universal Mounting System INSTALLATION GUIDE www.FastTT.bike FastTT Universal Mounting System Installation Guide www.fastTT.bike...
- Page 2 Congratulations on purchasing components for the FastTT Universal Mounting System The following guide provides important and valuable information regarding the installation of the various components. Components of the system: FastTT Universal Mounting System Installation Guide www.fastTT.bike...
- Page 3 This is for bolting to the base bar or bike mounting base during the measurement process for our aero bars. Angled mounting posts and spacers should always be installed with the largest spacer at the base, and the angled post at the top. FastTT Universal Mounting System Installation Guide www.fastTT.bike...
- Page 4 This is NOT necessary if you are using our tall stack bridge as part of your mounting system (see next section). FastTT Universal Mounting System Installation Guide www.fastTT.bike...
- Page 5 ‘UP’ facing up, and the ARROW facing forward. The bridge has a small lip along the front edge. This is to position FastTT spacers and angled posts correctly. When you install our angled posts and position them against this lip they are unable to slide forward, irrespective of the hole centre-to-centre requirements as detailed in the previous section.
- Page 6 When installing the full FastTT universal mounting system (spacers, angled posts and tall stack bridge), the following illustrates the correct placement and position of each element within the system. The tall stack bridge should always be installed at the top of the spacer stack, below the angled post.
-
Page 7: Warranty
The manufacturer (Bold Horizon Ltd t/a FastTT) assumes no responsibility or liability for any injury, loss or damage caused as a result of using this product under any conditions. All FastTT products are supplied with a 12-month manufacturers defect warranty. Any damage caused by misuse, incorrect installation, modification, accident, or any other cause is not covered by the manufacturer’s warranty.