Table of Contents
Advertisement
Quick Links
METAL BLINDS
Deluxe
GETTING STARTED
A few simple tools are required:
Level
Steel Tape Measure
Pencil
with Screws
Extension Bracket
Power Drill and
Flathead & Phillips
Awl (or tool for starting
End Mount Bracket
Screwdriver
Drill Bits
a screw hole)
Included in your order is all the hardware necessary for a
normal installation. Depending on the mounting surface,
fasteners other than the screws provided may be required.
Wall board and plaster require the use of anchors such as
expansion or toggle bolts. Bricks, tile and stone need special
Hex Machine
Phillips Flat Head
Phillips Machine
plugs and drill bits. Wood should always be pre-drilled to
Nuts
(2 Spacers
Wood Screws
Screws
per Bracket)
avoid splitting.
Professional installation is also available in most areas,
call 800-800-3329.
STANDARD HARDWARE
Inside
Outside
Mounting Bracket
Mounting Bracket
or
and Screws
(over 60" wide 4 screws
per bracket supplies)
1
| 1" Metal Blinds Deluxe
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for 3 Day Blinds METAL BLINDS Deluxe
Summary of Contents for 3 Day Blinds METAL BLINDS Deluxe
- Page 1 Wood Screws Screws per Bracket) avoid splitting. Professional installation is also available in most areas, call 800-800-3329. STANDARD HARDWARE Inside Outside Mounting Bracket Mounting Bracket and Screws (over 60” wide 4 screws per bracket supplies) | 1" Metal Blinds Deluxe...
- Page 2 100%. DO NOT shrink to fit the page or the template will not be accurate and result in improper installation. There is a rule drawn on the template so you can verify the printed template has been printed correctly. | 1" Metal Blinds Deluxe...
- Page 3 • Remove the mounting brackets from the headrail by pushing the back of the bracket forward and up with your thumb. Attaching brackets to headrail is described in “Blind Installation”. | 1" Metal Blinds Deluxe...
- Page 4 • Mount each bracket making sure all brackets are installed level and in line with each other. • Remove the mounting brackets from the headrail by pushing the back of the bracket forward and up with your thumb. | 1" Metal Blinds Deluxe...
- Page 5 They are " thick and allow the blind to be mounted flush with the outside edge of any standard window molding. Spacers are available by contacting our Client Care Team at 800-800-3329. | 1" Metal Blinds Deluxe...
- Page 6 ANSI/WMCA A100.1-2012 5.3.1.1 800-800-3329 | 3dayblinds.com | 1" Metal Blinds Deluxe Part # PM-028 © 3 Day Blinds Corporation 3/13...
Need help?
Do you have a question about the METAL BLINDS Deluxe and is the answer not in the manual?
Questions and answers