MAINTENANCE
maintenance
•
Do not use ammonia based cleaner, powdered cleaners or bleach; they can leave
a residue if not rinsed properly. Use a liquid cleaner, such as SoftScrub without
bleach, Fantastic, 409, etc., on a sponge or a soft cloth; use a stiff bristle brush to
remove heavy dirt from the textured surface if necessary. Always rinse with clean
water and dry with a soft cloth.
•
For heavy-duty cleaning (graffiti, etc.) use a stronger cleaning agent, such as
"Crown Anti-Vandal Spray", or the equivalent. Follow the same procedures noted
above, always rinsing all areas thoroughly in clean water and drying completely.
•
Do not use water with extremely high temperature and do not use steam to
clean vinyl because it may cause blistering and/or warping.
•
Do not use abrasive cleaners or other cleaning implements, such as steel wool or
cleaning pads, as they may mark or gouge the material.
•
To add luster and additional protection, you can apply a thin layer of a vinyl
enhancer, such as Pledge.
•
Please contact manufacturer for technical support questions and/or
replacement parts such as repair kits.
10
Rev 09/17
Installation, Operation & Maintenance Manual
Surface Mounted End Wall Guard
Model(s): BCGVS-EW-P